DPF error
AdBlue error
DEF error
EGR error





If you’re searching for egr mercedes sprinter 316 cdi, you’re likely an owner dealing with a dash warning that won’t disappear after repair. On a mercedes benz sprinter, the EGR system uses valves and sensors to manage emissions and combustion temperature. When the control unit detects an issue, it stores fault history on the display—so your vehicle can run “good,” but the warning stays on and keeps you stuck in repeat visits.
The valve for mercedes benz controls exhaust gas recirculation flow. If deposits build up, if wiring is loose, or if cooling performance is unstable, the system can log an EGR fault. Many mercedes benz owners notice the issue after long idling, repeated short trips, or delayed service. Sometimes an oil-related maintenance problem contributes to deposits, and sometimes a temperature-related irregularity triggers an “advanced” fault even though the mechanical part is still usable.
In Europe, rules and inspection practices can make warning lights a bigger problem than the drivability symptoms. Owners often compare brands, look for a part on sale, and search for sprinter parts or mercedes parts, thinking they should upgrade immediately. But even after the correct repair—cleaning, replacing a worn motor actuator, fixing a vacuum line, or restoring cooling stability—the control unit can keep old history until it’s cleared properly.
We sell one product: a reset kit that clears stored dashboard errors after the legitimate repair is completed. We do not sell EGR valves, ABS components, or any other hardware. If your ignition cycle still shows the warning after the fix, our kit helps clear stored fault history so the display reflects current conditions and you can keep using the vehicle without unnecessary downtime.
Before clearing codes, confirm the repair with live data, check connectors, and verify temperature stability. If the warning returns immediately, treat it as an active fault that still needs diagnostics. If it stays off, you’ve removed old history and can get back to mercedes motoring with confidence.
Welcome to a simpler workflow: fix the cause, then clear the stored warning—no extra products, no bundled parts, just a focused solution for mercedes benz vehicle owners.
As a general rule, confirm the repair correctly before you clear anything: check wiring, verify live values, and make sure there is no turbo control fault or transmission strategy forcing reduced power. When owners keep buying parts without proving the cause, they end up with extra parts and delayed service. Our approach for mercedes-benz vehicles is simple: repair the real issue, install the right parts once, confirm the fix, then clear stored history. This helps mercedes-benz owners avoid repeat visits and unnecessary parts orders, and it keeps mercedes-benz diagnostics consistent across mercedes-benz platforms. If you maintain mercedes-benz reliability with the correct parts plan, mercedes-benz warnings stop being a time sink, and parts spending stays under control.
For a working van, the goal is to replace only the necessary parts, confirm the fix, and keep the van earning money instead of sitting in the yard. After the correct parts are installed, mercedes-benz owners can clear stored faults so the van display matches the real condition. This is especially useful when the van is shared across drivers, because a clean dash reduces confusion and prevents ordering extra parts later. The process stays consistent for mercedes-benz service workflows: repair first, then clear history, then verify the van on a short road test.