Find matching DEF, DPF, EGR, and AdBlue warnings
View prices and available package options
Plug-in programming with no tools or laptop required
Stage 1 tuning, DPF Delete, and additional features
Step-by-step ordering process
Worldwide shipping information
Available payment options
Multi-vehicle pricing and upgrade options
Answers before and after purchase
What to choose, how it works and features
Installation, usage and troubleshooting
Technical articles and guides
AdBlue error
DEF error
DPF error
EGR error





A dashboard message about tank amount in a fleet diesel Sprinter van needs a different response from problems in the DEF dosing equipment. With Mercedes Sprinter DEF, separate a refill request from a component fault before choosing an action. Adding liquid may address a low level in the van, but it does not repair failed equipment or guarantee that a warning light clears.
DEF means diesel exhaust fluid. This emissions fluid contains urea and deionized water. The SCR process in the van uses liquid injected into the diesel engine exhaust and helps convert nitrogen oxides (NOx) into nitrogen and water. Liquid quality, measured amount and component operation in the van are separate considerations.
Depending on the van’s configuration, the fluid system includes a tank, heater, pump, injector and sensors. NOx sensors help monitor SCR system performance, while a level sensor reports the measured amount in the van’s tank, not NOx. A warning light alone does not identify a failed part in the van, including a sensor. The search wording “exhaust fluid DEF injector” refers to the dosing component; it does not establish that the injector caused a particular message.
When buying PEAK BlueDEF diesel exhaust fluid or comparing other brands, match the product specification to the Sprinter van’s requirements. The brand name alone does not establish suitability for the diesel van. Follow the vehicle instructions for maintenance and the product’s storage guidance, including cold storage for the van. Keep containers sealed and protect the contents from contamination; do not add water or mix in other liquids. The wrong liquid, including oil, can contaminate the whole tank in a van. Stop adding if you suspect contamination problems.
Sprinters can have different DEF tanks and filling arrangements between vans, including fleet vans. Locate the correct filler and cap on your fleet Sprinter van before you fill. As the owner, keep the filler area clean; do not skip this step. A gallon or gal marking describes container volume, not the amount the van’s tank currently needs. Use the vehicle’s refill guidance for your van rather than assuming that an entire container will fit.
A low level light in the Sprinter van may call for a refill, while a fault message can involve problems with dosing equipment, heating or sensor operation. The wording and vehicle configuration of these vans determine the appropriate response for Sprinters. Neither a visual inspection nor the dashboard message alone proves that the pump, heater, injector or a sensor has failed.
Fluid properties and measured amount from a sensor also differ: suitable liquid does not prove that the level sensor reading is correct, and an amount reading does not establish liquid quality. Low level problems can contribute to diesel engine starting restrictions on vehicles, including Sprinters, configured to apply them. Component faults can also trigger restrictions in the van. Do not assume that adding liquid necessarily clears either condition.
Some configurations of Sprinters display a countdown or apply a no-start condition or power restriction on affected vans. Follow the exact message and vehicle instructions for Sprinters; do not assume that a displayed count refers to distance in miles, engine starts or ignition cycles. Those measures are not interchangeable.
| Situation | What it establishes |
|---|---|
| Van: low supply | A tank level sensor reports amount in the van; it does not certify quality. |
| Van: contaminated DEF | A good sensor reading does not certify the van’s tank contents; a light by itself does not establish contamination. |
| Sprinter van: component reading problems | Electrical wiring in the van can affect a sensor reading; the catalyst has a different role from a sensor. A message alone cannot establish where a fault has come from. |
| Sprinter van: light after refill | A tank sensor reading in the van and warning light clearing are separate observations; a recognized refill does not guarantee the light will clear. |
| Sprinter van: OBDtune and DEF | Suppression does not change contents or repair a sensor in the van’s system; the temporary DEF counter reset leaves the system operating. |
OBDtune is a hand-held OBD tool for supported Mercedes-Benz diesel vehicles. For a compatible fleet diesel Sprinter van, connect the tool to the OBD port, select a supported script on the COMAND or multimedia screen, wait for completion and disconnect it. Vehicles without an audio screen, including supported Sprinters, can use microSD cards for script selection. Confirm support for the specific vehicle and requested function in these vans; Sprinters can differ.
The supported options include AdBlue/DEF error and restriction suppression and an AdBlue/DEF Counter Reset. The counter reset temporarily resets the relevant counter or restrictions while the system continues to operate. These options have different purposes; a temporary reset does not resolve the underlying system fault or related problems.
In most supported cases, the software approach does not require physical removal or replacement of components. The supplied software can be returned to its factory state for diagnosis or repair. Error suppression does not repair failed components or establish safe driving. A reset does not guarantee restored starter operation, and no option establishes permission for public-road use.
SCR total delete – no longer necessary to repair the SCR system and refill the AdBlue fluid
Removes Check Engine error
Removes 0 Remaining Starts error
Removes Starts idle error
Removes Check AdBlue error
Ability to roll back to factory settings
Maintains the dealer warranty
Easy pass emissions test ability
We suggest deleting all of the following components together (SCR, EGR, Flaps and DPF) as all of these elements work together as one system
Disables SCR (DEF) system on equipped vehicles
Disables Swirl Flaps in the intake manifold
Optionally disables Diesel Particulate Filter
Disables EGR valve
Ability to roll back to factory settings
Maintains the dealer warranty
Easy pass emissions test ability
Temporary solution – start the engine and drive to workshop without limitations but the SCR still needs to be repaired
Ability to reset engine starts
counter as many times as needed
SCR system continues to work
Absolutely legal
Maintains the dealer warranty